![]() ![]() PEEK materials are supplied by Ensinger TECAPEEK™ to ensure the reliability of materials and consistency of material components. ![]() Tirapid’s PEEK material suppliers are the world’s top material companies. The mold processing temperature is controlled at 170-200℃, Colors are natural and beige. PEEK 450G density is 1.30 g/cc suitable for processing temperature≤ 100℃, suitable for FDA. One disadvantage of using PEEK GF30 is that it wears more on mating parts. The 30% glass-filled PEEK has a constant service temperature of about 300☌, thus, it is mainly used in oil and gas industries. The advantage of using PEEK GF30 is that this grade provides higher strength/stiffness over the unfilled PEEK. It is a PEEK blended with 30% fiberglass and is available in natural and black colors. The 30% glass-filled PEEK is the second most common grade of PEEK. If you are looking for a versatile, safe, and reliable polymer, Unfilled-PEEK grade is an excellent choice. In addition, Unfilled-PEEK grade has excellent electrical and thermal properties, making it an ideal material for a variety of electronic and medical devices. This grade is ideal for these applications because it does not contain any fillers or additives. One type of PEEK is known as Unfilled-PEEK grade, which is used in a wide range of applications including food processing, medical devices, and electrical components. Among them, the most common PEEK grades are as follows. Tirapid offers several grades of PEEK processing such as PEEK GF30, unfilled PEEK, PEEK CF30, PEEK 450G, and graphite-filled PEEK. The manufacturer must follow all these set guidelines appropriately to ensure that their product gets approved without any hassle. The set guidelines for clearance angle are 6 to 8 degrees, the rake angle is 0 to 5 degrees, the cutting speed is 250 to 500 m/min, the cutting speed is 250 to 500 m/min, and the feed rate is 0.1 to 0.5 mm/rev. The set guidelines for clearance angle are 5 to 10 degrees, the rake angle is 10 to 30 degrees, and the cutting speed is 50 to 200 m/min. The set guidelines for clearance angle are 5 to 10 degrees, the rake angle is 10 to 30 degrees, the cutting speed is 50 to 200 m/min, and the feed rate is 0.1 to 0.3 mm/rev. The set guidelines for clearance angle are 15 to 30 degrees, the rake angle is 0 to 5 degrees, the cutting speed is 500 to 800 m/min, and the pitch is 3 to 5mm. These processes include sawing, drilling, milling, and turning. Tirap has established a set of guidelines for the different processes involved in the processing of PEEK materials. ![]()
0 Comments
Leave a Reply. |